You can meet us on the following trade shows +++KAZBUILD | Kazakhstan Almaty , September 04 - 06, 2024 +++BATIMAT | France Paris, September 30 - October 03, 2024 +++BAU China 2024 | China Shanghai, October 16 - 19, 2024 +++VETECO | Spain Madrid, November 05 - 08, 2024 +++
HAHN AT-G FOR MAIN ENTRANCE DOORS AND SIDE ENTRANCE DOORS
The Hahn AT-G is an improved successor model for lightweight main entrance doors and side entrance doors made of aluminium profiles. The 2-piece door hinge supports up to 90 kg and is adjustable in 6 directions. All adjustments are made on the hinged door leaf. In this way, the door’s height level can be adjusted from + 3 mm to – 2 mm. The horizontal adjustment range is ± 5 mm. The adjustment is infinitely variable, as needed. To relieve pressure, the sealing pressure can be reduced via a – 2.5 mm adjustment or increased via a + 2.5 mm adjustment. A high degree of pre-assembly reduces the processing time in the workshop. For flush-mounted profile systems and recessed situations from 3.5 mm – 13 mm, the Hahn AT-G is used on most profile systems used for main entrance doors. Two different widths of hinge bases are available for fastening to the frame. The hinge is mounted directly without any fastening plates in single and multiple chamber systems. The centre distance for all hinge variants is 68.5 mm (half measure 0) and has remained the same as the previous model.
Hahn VL-Band AT
Faster, more convenient, simpler – our new concealed door hinge for aluminium doors.
The technical advantages of the Hahn VL-Band AT include faster processing, greater convenience on the building site and easy adjustability. The new, concealed hinge design for doors made of flush-mounted aluminium profiles is completely concealed inside the profiles.
The Hahn VL-Band AT supports, when two hinges are used, door leaves weighing up to 180 kg, depending on the profile section’s design. Since door profiles act differently as a result of their technical designs, Dr. Hahn has prepared corresponding processing and installation drawings as well as load tables for the system-related use of the VL-Band AT. Dr. Hahn recommends enquiring about the service by its Application Technology department prior to using the hinge. The hinge can be assembled using the specially designed supports. As a result, the door leaf is placed directly in its end position and does not require any additional support for mounting. The new hinge can be adjusted steplessly in 6 directions. This allows you to perfectly adjust every door element to the on-site conditions. The adjustment can be carried out by one person with the door leaf mounted.
Disassembly on the building site is especially easy. It is necessary to loosen only one safety screw per hinge in order to be able to remove the door leaf without any special tool.
Hahn KT-RKV, 2-piece
Door hinge of butt design for plastic doors with mounting in the door rebate.
The Hahn KT-RKV is fastened with screws in the rebate as is common for butt hinges. Depending on the design of the profile sections, the 3-piece hinges are able to support doors weighing up to 120 kg, while the 2-piece version is able to bear up to 90 kg. These two series are fastened with the aid of self-drilling screws in the reinforcement of the frame profile with long pins to distribute the forces, acting on the hinge. In addition, Dr. Hahn also offers the option of pre-drilling into the prechamber alone – in other words only in the plastic – and supporting door leaves weighing up to max. 80 kg by using shorter pins and self-drilling screws.
Efficient processing in the workshop and at the building site
The mounting and removing of the door leaf is particularly easy and convenient with the 3-piece hinges. The upper hinge part can be easily mounted and removed in any position without having to loosen the fastening screws. Consequently, the door is mounted as with the 2-piece version and only then connected again with the upper hinge part. An important advantage for installation personnel on the building site. In case of a low door lintel the door leaf can be removed in the same way.
KT-RN & KT-RV – Large and stable butt hinges for plastic doors
Slender, stable and three-dimensional adjustment are the most outstanding features of the new Dr. Hahn Rollenbands for high-quality residential and commercial structures, in addition to continuous seal tightness.
The Hahn Rollenband AT can be adapted to all common profile systems. You can quickly check here whether the new Hahn Rollenband is suited for your profiles.
The new Rollenband AT is a hinge system that can be adapted to all common door frame systems. Its roller diameter of 20 mm meets the high design standards, which building owners and architects have for ensuring that hinges on their residential and commercial doors are as unobtrusive as possible. It can be adjusted in six directions. The adjustment takes place inside of the hinges. The well-designed hinge contour is retained even in case of extreme adjustment. The largely pre-assembled hinge is quick and easy to install.
A one-piece bearing pin made of stainless steel ensures a high level of stability. This is designed in such a way that the door can be easily removed even in case of a low lintel. The bearing point made of a special high-quality material is almost abrasion-free even with doors that are very heavy and subject to frequent use and thus requires no maintenance by facility management.
The Hahn Rollenband AT is a system-adapted hinge which was developed in close co-operation with door manufacturers. Different door/frame combinations require special solutions.To help us process your enquiry and order, we require accurate information about the respective door/frame combination to be used.
HAHN AT-G FOR MAIN ENTRANCE DOORS AND SIDE ENTRANCE DOORS
The Hahn AT-G is an improved successor model for lightweight main entrance doors and side entrance doors made of aluminium profiles. The 2-piece door hinge supports up to 90 kg and is adjustable in 6 directions. All adjustments are made on the hinged door leaf. In this way, the door’s height level can be adjusted from + 3 mm to – 2 mm. The horizontal adjustment range is ± 5 mm. The adjustment is infinitely variable, as needed. To relieve pressure, the sealing pressure can be reduced via a – 2.5 mm adjustment or increased via a + 2.5 mm adjustment. A high degree of pre-assembly reduces the processing time in the workshop. For flush-mounted profile systems and recessed situations from 3.5 mm – 13 mm, the Hahn AT-G is used on most profile systems used for main entrance doors. Two different widths of hinge bases are available for fastening to the frame. The hinge is mounted directly without any fastening plates in single and multiple chamber systems. The centre distance for all hinge variants is 68.5 mm (half measure 0) and has remained the same as the previous model.
Hahn VL-Band AT
Faster, more convenient, simpler – our new concealed door hinge for aluminium doors.
The technical advantages of the Hahn VL-Band AT include faster processing, greater convenience on the building site and easy adjustability. The new, concealed hinge design for doors made of flush-mounted aluminium profiles is completely concealed inside the profiles.
The Hahn VL-Band AT supports, when two hinges are used, door leaves weighing up to 180 kg, depending on the profile section’s design. Since door profiles act differently as a result of their technical designs, Dr. Hahn has prepared corresponding processing and installation drawings as well as load tables for the system-related use of the VL-Band AT. Dr. Hahn recommends enquiring about the service by its Application Technology department prior to using the hinge. The hinge can be assembled using the specially designed supports. As a result, the door leaf is placed directly in its end position and does not require any additional support for mounting. The new hinge can be adjusted steplessly in 6 directions. This allows you to perfectly adjust every door element to the on-site conditions. The adjustment can be carried out by one person with the door leaf mounted.
Disassembly on the building site is especially easy. It is necessary to loosen only one safety screw per hinge in order to be able to remove the door leaf without any special tool.
The Hahn KT-RKV is fastened with screws in the rebate as is common for butt hinges. Depending on the design of the profile sections, the 3-piece hinges are able to support doors weighing up to 120 kg, while the 2-piece version is able to bear up to 90 kg. These two series are fastened with the aid of self-drilling screws in the reinforcement of the frame profile with long pins to distribute the forces, acting on the hinge. In addition, Dr. Hahn also offers the option of pre-drilling into the prechamber alone – in other words only in the plastic – and supporting door leaves weighing up to max. 80 kg by using shorter pins and self-drilling screws.
Efficient processing in the workshop and at the building site
The mounting and removing of the door leaf is particularly easy and convenient with the 3-piece hinges. The upper hinge part can be easily mounted and removed in any position without having to loosen the fastening screws. Consequently, the door is mounted as with the 2-piece version and only then connected again with the upper hinge part. An important advantage for installation personnel on the building site. In case of a low door lintel the door leaf can be removed in the same way.
Hahn instructions app
The Hahn instructions app ensures that our adjustment instructions are always available to you wherever you are.
KT-RN & KT-RV – Large and stable butt hinges for plastic doors
Slender, stable and three-dimensional adjustment are the most outstanding features of the new Dr. Hahn Rollenbands for high-quality residential and commercial structures, in addition to continuous seal tightness.
The Hahn Rollenband AT can be adapted to all common profile systems. You can quickly check here whether the new Hahn Rollenband is suited for your profiles.
HAHN AT-G FOR MAIN ENTRANCE DOORS AND SIDE ENTRANCE DOORS
The Hahn AT-G is an improved successor model for lightweight main entrance doors and side entrance doors made of aluminium profiles. The 2-piece door hinge supports up to 90 kg and is adjustable in 6 directions. All adjustments are made on the hinged door leaf. In this way, the door’s height level can be adjusted from + 3 mm to – 2 mm. The horizontal adjustment range is ± 5 mm. The adjustment is infinitely variable, as needed. To relieve pressure, the sealing pressure can be reduced via a – 2.5 mm adjustment or increased via a + 2.5 mm adjustment. A high degree of pre-assembly reduces the processing time in the workshop. For flush-mounted profile systems and recessed situations from 3.5 mm – 13 mm, the Hahn AT-G is used on most profile systems used for main entrance doors. Two different widths of hinge bases are available for fastening to the frame. The hinge is mounted directly without any fastening plates in single and multiple chamber systems. The centre distance for all hinge variants is 68.5 mm (half measure 0) and has remained the same as the previous model.
Hahn VL-Band AT
Faster, more convenient, simpler – our new concealed door hinge for aluminium doors.
The technical advantages of the Hahn VL-Band AT include faster processing, greater convenience on the building site and easy adjustability. The new, concealed hinge design for doors made of flush-mounted aluminium profiles is completely concealed inside the profiles.
The Hahn VL-Band AT supports, when two hinges are used, door leaves weighing up to 180 kg, depending on the profile section’s design. Since door profiles act differently as a result of their technical designs, Dr. Hahn has prepared corresponding processing and installation drawings as well as load tables for the system-related use of the VL-Band AT. Dr. Hahn recommends enquiring about the service by its Application Technology department prior to using the hinge. The hinge can be assembled using the specially designed supports. As a result, the door leaf is placed directly in its end position and does not require any additional support for mounting. The new hinge can be adjusted steplessly in 6 directions. This allows you to perfectly adjust every door element to the on-site conditions. The adjustment can be carried out by one person with the door leaf mounted.
Disassembly on the building site is especially easy. It is necessary to loosen only one safety screw per hinge in order to be able to remove the door leaf without any special tool.
Hahn KT-RKV, 2-piece
Door hinge of butt design for plastic doors with mounting in the door rebate.
The Hahn KT-RKV is fastened with screws in the rebate as is common for butt hinges. Depending on the design of the profile sections, the 3-piece hinges are able to support doors weighing up to 120 kg, while the 2-piece version is able to bear up to 90 kg. These two series are fastened with the aid of self-drilling screws in the reinforcement of the frame profile with long pins to distribute the forces, acting on the hinge. In addition, Dr. Hahn also offers the option of pre-drilling into the prechamber alone – in other words only in the plastic – and supporting door leaves weighing up to max. 80 kg by using shorter pins and self-drilling screws.
Efficient processing in the workshop and at the building site
The mounting and removing of the door leaf is particularly easy and convenient with the 3-piece hinges. The upper hinge part can be easily mounted and removed in any position without having to loosen the fastening screws. Consequently, the door is mounted as with the 2-piece version and only then connected again with the upper hinge part. An important advantage for installation personnel on the building site. In case of a low door lintel the door leaf can be removed in the same way.
KT-RN & KT-RV – Large and stable butt hinges for plastic doors
Slender, stable and three-dimensional adjustment are the most outstanding features of the new Dr. Hahn Rollenbands for high-quality residential and commercial structures, in addition to continuous seal tightness.
The Hahn Rollenband AT can be adapted to all common profile systems. You can quickly check here whether the new Hahn Rollenband is suited for your profiles.
Enthusiasm for perfect technology, excellent design, and exceptional service has made Dr. Hahn one of the most innovative companies when it comes to development and production of hinges for doors comprising metal and PVC sections. With exports accounting for approx. 60% of its total production, Dr. Hahn hinges now rank among the major brands of the industry, internationally speaking. Door manufacturers and installers all over the globe can rely on the fact that Dr. Hahn has the right solution for every situation. Screw-on hinges, butt hinges, clamp hinges or concealed hinges in a variety of technical designs and many colours fulfil all demands based on highest quality features.
